PartsTable
Technical Data Sheet
Download PDF

38108 — BUSHING,SLEEVE

✓ Government record, cited
Legrand · ORING SEAL
PRODUCT OVERVIEW

38108: BUSHING,SLEEVE.

Sends DVI-D signals to multiple DVI monitors over extended distances! The LINDY DVI Video Splitter allows you to connect your computer to up to 8 DVI-D enabled displays or projectors. It supports all DVI Digital Single Link resolutions while superb image quality is maintained throughout, even when splitting the video signal to multiple monitors.

There is also IC amplifier support for each individual output port. For even more monitor displays you can easily cascade multiple video splitters together. The LINDY DVI Video Splitter is the ideal solution for presentation, training, advertising and classroom use.

- Supports DVI-D Single Link resolutions of up to 1920 x 1200 and HD resolutions up to 1080p (1920 x 1080) - Video bandwidth up to 165MHz - Supports transmission distances of up to 15m when using LINDY Premium DVI-D SLD cables (max. resolution at 15m is 1920 x 1200) - Daisy chain support for adding extra monitors - Plug and Play installation - no extra softw This part is cataloged in the U.S. Government catalog under NSN 5330-00-512-3684, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
38108
NSN: 5330-00-512-3684
NIINs: 005123684, 010746930, 010746962, 012696385, 015810838
FSC: 5330 — Packing and Gasket Materials
CAGE: 0B0B1 — MAHLE AFTERMARKET INC. DBA AE CLEVITE INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length23.8 MILLIMETERS NOMINAL MM
drive_end_shapeSQUARE SINGLE END INTERNAL
style_designatorINTERNAL-INTERNAL
features_providedMANUAL TOOL
surface_treatmentCHROMIUM OVERALL
drive_surface_size0.375 INCHES NOMINAL SINGLE END IN
wrenching_surface_size8.0 MILLIMETERS NOMINAL SINGLE END MM
wrenching_surface_shape12 POINT SINGLE END INTERNAL
drive_end_outside_diameter16.7 MILLIMETERS NOMINAL MM
wrenching_end_opening_depth4.2 MILLIMETERS NOMINAL MM
wrenching_end_outside_diameter11.6 MILLIMETERS NOMINAL MM
NSN5330-00-512-3684
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 38108 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.094 INCHES NOMINAL IN
•
BEARING SURFACE WIDTH: 0.688 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-C-576,TY 1A,CL 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL A
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE LENGTH: 6.750 INCHES NOMINAL IN
•
MATERIAL: CORK AND RESIN SYNTHETIC OVERALL
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.094 INCHES NOMINAL IN
BEARING SURFACE WIDTH0.688 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-C-576,TY 1A,CL 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL A
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE LENGTH6.750 INCHES NOMINAL IN
MATERIALCORK AND RESIN SYNTHETIC OVERALL
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 3
48143DBReference document
Same NSN cross-reference
Reference document — Secondary reference
48143DCReference document
Same NSN cross-reference
Reference document — Secondary reference
48143DReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 38108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38108?
38108 is a BUSHING,SLEEVE manufactured by Legrand.
What parts can replace 38108?
There are 3 known substitutes for 38108: 48143DB, 48143DC, 48143D. Substitute compatibility should be verified for your specific system.
What is the NSN for 38108?
38108 is cataloged in the U.S. Government catalog under NSN 5330-00-512-3684. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 38108