PartsTable
Technical Data Sheet
Download PDF

3810088-4 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

3810088-4: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, diameter: 0.1845 INCHES MINIMUM AND 0.1850 INCHES MAXIMUM IN, material: IRON ALLOY 660 OVERALL, head_style: FLAT FILLISTER, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER, special_features: QUICK DISCONNECT DESIGNED TO INSTALL AND RELEASE UNDER A 3-10 LB AXIAL LOAD LBS. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-117-5210, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3810088-4
NSN: 5315-01-117-5210
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
height0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
diameter0.1845 INCHES MINIMUM AND 0.1850 INCHES MAXIMUM IN
materialIRON ALLOY 660 OVERALL
head_styleFLAT FILLISTER
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER
special_featuresQUICK DISCONNECT DESIGNED TO INSTALL AND RELEASE UNDER A 3-10 LB AXIAL LOAD LBS
style_designatorSTRAIGHT
pin_chamfer_angle28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM
pin_head_diameter0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
under_head_length0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
first_hole_diameter0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
hole_arrangement_styleDRILLED THRU HEAD
NSN5315-01-117-5210
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3810088-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER
•
HOLE ARRANGEMENT STYLE: DRILLED THRU HEAD
•
UNDER HEAD LENGTH: 0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM
•
FIRST HOLE DIAMETER: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER
HOLE ARRANGEMENT STYLEDRILLED THRU HEAD
UNDER HEAD LENGTH0.610 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
PIN CHAMFER ANGLE28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM
FIRST HOLE DIAMETER0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.1845 INCHES MINIMUM AND 0.1850 INCHES MAXIMUM IN
HEAD STYLEFLAT FILLISTER
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
10122907Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3810088-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3810088-4?
3810088-4 is a PIN,STRAIGHT,HEADED.
What parts can replace 3810088-4?
There is 1 known substitute for 3810088-4: 10122907. Substitute compatibility should be verified for your specific system.
What is the NSN for 3810088-4?
3810088-4 is cataloged in the U.S. Government catalog under NSN 5315-01-117-5210. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3810088-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.