PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 380G13
380G13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.750 INCHES NOMINAL IN, housing_bore_diameter: 4.249 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.938 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-7175, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
380G13
NSN: 5330-00-286-7175
FSC: 5330
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.750 INCHES NOMINAL IN
housing_bore_diameter4.249 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.938 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-286-7175
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 380G13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 4.249 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT A
•
SEAL WIDTH: 0.750 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER4.249 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT A
SEAL WIDTH0.750 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT B
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER2.938 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
394745Interchangeable
interchangeable cross-reference
interchangeable
3M1584Interchangeable
interchangeable cross-reference
interchangeable
7400TN-018Interchangeable
interchangeable cross-reference
interchangeable
COBAN 1584Interchangeable
interchangeable cross-reference
interchangeable
35348Interchangeable
interchangeable cross-reference
interchangeable
43922Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 380G13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 380G13?
380G13 is a SEAL,PLAIN ENCASED.
What parts can replace 380G13?
There are 13 known substitutes for 380G13: 394745, 3M1584, 7400TN-018 and 10 more. Substitute compatibility should be verified for your specific system.
Is 380G13 still available?
380G13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 380G13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026