PartsTable
Technical Data Sheet
Download PDF

3809-8-8 — PLUG,PROTECTIVE,DUST AND MOISTUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3809-8-8: PLUG,PROTECTIVE,DUST AND MOISTUR.

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: ALUMINUM ALLOY, drive_type: RAISED RIB, design_type: FRICTION, overall_diameter: 1.000 INCHES MAXIMUM IN, special_features: EQUIPPED WITH RETAINING CABLE AND HOOK, features_provided: SHOULDER. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-300-9470, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3809-8-8
NSN: 5340-00-300-9470
FSC: 5340 — Hardware, Commercial
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
drive_typeRAISED RIB
design_typeFRICTION
overall_diameter1.000 INCHES MAXIMUM IN
special_featuresEQUIPPED WITH RETAINING CABLE AND HOOK
features_providedSHOULDER
opening_inside_diameter_for_which_designed0.830 INCHES NOMINAL IN
NSN5340-00-300-9470
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3809-8-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 1.000 INCHES MAXIMUM IN
•
DRIVE TYPE: RAISED RIB
•
FEATURES PROVIDED: SHOULDER
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.830 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER1.000 INCHES MAXIMUM IN
DRIVE TYPERAISED RIB
FEATURES PROVIDEDSHOULDER
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.830 INCHES NOMINAL IN
SPECIAL FEATURESEQUIPPED WITH RETAINING CABLE AND HOOK
MATERIALALUMINUM ALLOY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3809-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 3809-8-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3809-8-8?
3809-8-8 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 3809-8-8?
There is 1 known substitute for 3809-8-8: 3809-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 3809-8-8?
3809-8-8 is cataloged in the U.S. Government catalog under NSN 5340-00-300-9470. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3809-8-8