PartsTable
Technical Data Sheet
Download PDF

38045 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
Lindy · MRO · MRO_GENERAL
PRODUCT OVERVIEW

38045: CONE AND ROLLERS,TAPERED ROLLER.

Basic surge protected rPDUs deliver reliable power to critical IT equipment within a rack or cabinet and comes equipped with built-in surge protection. Key specifications include material: STEEL BODY, overall_width: 1.375 INCHES NOMINAL IN, overall_height: 1.375 INCHES NOMINAL IN, overall_length: 1.625 INCHES NOMINAL IN, mounting_method: SCREW, special_features: BLACK PLASTIC CONTROL KNOB. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-101-0823, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 38045
NSN: 3110-00-101-0823
NIINs: 001010823, 002393282, 012119921
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 54123 — COLSON CORP THE (USA)
SPECIFICATIONS
materialSTEEL BODY
overall_width1.375 INCHES NOMINAL IN
overall_height1.375 INCHES NOMINAL IN
overall_length1.625 INCHES NOMINAL IN
mounting_methodSCREW
special_featuresBLACK PLASTIC CONTROL KNOB
style_designatorCLAMP
accommodation_hole_width0.100 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
mounting_device_quantity1
NSN3110-00-101-0823
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 38045 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 0.8540 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.8125 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH0.8540 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.8125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
359ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
209MBB1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 38045?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38045?
38045 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 38045?
There are 2 known substitutes for 38045: 359A, 209MBB1. Substitute compatibility should be verified for your specific system.
What is the NSN for 38045?
38045 is cataloged in the U.S. Government catalog under NSN 3110-00-101-0823. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 38045

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.