PartsTable / COMPONENT / 38006C
38006C
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, construction: ONE-PIECE, outside_diameter: 0.762 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, surface_treatment: CADMIUM RETAINER, retainer_thickness: 0.0725 INCHES MINIMUM AND 0.0775 INCHES MAXIMUM IN, packing_inside_diameter: 0.467 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-7536, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
38006C
NSN: 5330-00-286-7536 FSC: 5330 CAGE: R1120 — SATAIR A/S (DNK)
SPECIFICATIONS
material STEEL RETAINER construction ONE-PIECE outside_diameter 0.762 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN surface_treatment CADMIUM RETAINER retainer_thickness 0.0725 INCHES MINIMUM AND 0.0775 INCHES MAXIMUM IN packing_inside_diameter 0.467 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN NSN 5330-00-286-7536
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 38006C
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• RETAINER THICKNESS: 0.0725 INCHES MINIMUM AND 0.0775 INCHES MAXIMUM IN
• PACKING INSIDE DIAMETER: 0.467 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
• MATERIAL: RUBBER SYNTHETIC PACKING
• SURFACE TREATMENT: CADMIUM RETAINER
• OUTSIDE DIAMETER: 0.762 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER THICKNESS 0.0725 INCHES MINIMUM AND 0.0775 INCHES MAXIMUM IN PACKING INSIDE DIAMETER 0.467 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN MATERIAL RUBBER SYNTHETIC PACKING MATERIAL STEEL RETAINER SURFACE TREATMENT CADMIUM RETAINER OUTSIDE DIAMETER 0.762 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN CONSTRUCTION ONE-PIECE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
1302 Interchangeable interchangeable cross-reference
interchangeable
310-RT Interchangeable interchangeable cross-reference
interchangeable
940 7/16 Interchangeable interchangeable cross-reference
interchangeable
110716 Interchangeable interchangeable cross-reference
interchangeable
AM2415APX Interchangeable interchangeable cross-reference
interchangeable
1100716000 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 38006C?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38006C?
38006C is a PACKING WITH RETAINER.
What parts can replace 38006C?
There are 14 known substitutes for 38006C: 1302, 310-RT, 940 7/16 and 11 more. Substitute compatibility should be verified for your specific system.
Is 38006C still available?
38006C is currently cancelled.