PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 38-2P
38-2P ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

PISTON,INTERNAL COMBUSTION ENGIN. Key specifications include material: STEEL OVERALL, tip_type: PHILLIPS CROSS, overall_length: 12.0 INCHES NOMINAL IN, shank_diameter: 0.25 INCHES NOMINAL IN, drive_shank_type: MALE HEXAGON W/NOTCH, special_features: QUICK RELEASE SHANK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-476-6433, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
38-2P
NSN: 4820-00-476-6433
FSC: 4820
CAGE: 14959 — CRANE CO DIV VALVE DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
tip_typePHILLIPS CROSS
overall_length12.0 INCHES NOMINAL IN
shank_diameter0.25 INCHES NOMINAL IN
drive_shank_typeMALE HEXAGON W/NOTCH
special_featuresQUICK RELEASE SHANK
features_providedPOWER TOOL
width_across_flats0.25 INCHES NOMINAL IN
tip_size_designation2
NSN4820-00-476-6433
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 38-2P · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL FLOW CONTROL DEVICE
•
FLOW CONTROL DEVICE: DISKDISK
•
FEATURES PROVIDED: BONNET PACKINGBONNET PACKING
•
STYLE DESIGNATOR: STRAIGHT THRU
•
MEDIA FOR WHICH DESIGNED: STEAM FIRST RESPONSE
•
BONNET TYPE: INSIDE SCREWINSIDE SCREW
•
THREAD DIRECTION: RIGHT-HAND FIRST ENDRIGHT-HAND FIRST END
•
BONNET ATTACHMENT METHOD: UNIONUNION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL FLOW CONTROL DEVICE
FLOW CONTROL DEVICEDISKDISK
FEATURES PROVIDEDBONNET PACKINGBONNET PACKING
STYLE DESIGNATORSTRAIGHT THRU
MEDIA FOR WHICH DESIGNEDSTEAM FIRST RESPONSE
BONNET TYPEINSIDE SCREWINSIDE SCREW
THREAD DIRECTIONRIGHT-HAND FIRST ENDRIGHT-HAND FIRST END
BONNET ATTACHMENT METHODUNIONUNION
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE AND AISI 421/SAE 51420 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-390,ALLOY D4 FED SPEC SINGLE MATERIAL RESPONSE BODY66 FED STD SINGLE MATERIAL RESPONSE AND AISI 421/SAE 51420 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
1853PInterchangeable
interchangeable cross-reference
interchangeable
1020PInterchangeable
interchangeable cross-reference
interchangeable
972PInterchangeable
interchangeable cross-reference
interchangeable
382PInterchangeable
interchangeable cross-reference
interchangeable
362EInterchangeable
interchangeable cross-reference
interchangeable
556-P 2 IN.Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 38-2P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38-2P?
38-2P is a PISTON,INTERNAL COMBUSTION ENGIN.
What parts can replace 38-2P?
There are 6 known substitutes for 38-2P: 1853P, 1020P, 972P and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 38-2P?
38-2P is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-476-6433. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 38-2P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026