PartsTable
Technical Data Sheet

38 76504 2016 2 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.754 INCHES NOMINAL IN, center_hole_diameter: 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN, elongation_percentage: 250 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-800-5182, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
38 76504 2016 2
NSN: 5331-00-800-5182
FSC: 5331 — O-RING
CAGE: 86329 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV GAS TURBINE FUEL SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter0.754 INCHES NOMINAL IN
center_hole_diameter0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
elongation_percentage250 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-800-5182
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 38 76504 2016 2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.754 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 250 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CENTER HOLE DIAMETER0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.754 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE250 MAXIMUM
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
SAE-AS29561InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS29561-265InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AS29561InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS29561-123InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS29561-347InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS29561-262InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 38 76504 2016 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 38 76504 2016 2?
38 76504 2016 2 is a O-RING.
What parts can replace 38 76504 2016 2?
There are 24 known substitutes for 38 76504 2016 2: SAE-AS29561, MS29561-265, AS29561 and 21 more. Substitute compatibility should be verified for your specific system.
Is 38 76504 2016 2 still available?
38 76504 2016 2 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 38 76504 2016 2