PartsTable
Technical Data Sheet
Download PDF

37L33-1-2AB — CATCH,FLUSH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

37L33-1-2AB: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 2.050 INCHES NOMINAL IN, material: UNABLE TO DECODE, special_features: CAGE MATL STEEL;WASHER MATL STEEL, center_to_center_distance_between_mounting_holes_along_width: 1.497 INCHES MINIMUM AND 1.503 INCHES MAXIMUM IN, center_to_center_distance_between_mounting_holes_along_length: 1.528 INCHES MINIMUM AND 1.534 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-218-4695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
37L33-1-2AB
NSN: 5340-00-218-4695
FSC: 5340 — Hardware, Commercial
CAGE: 71286 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV CAMLOC PRODUCTS (USA)
SPECIFICATIONS
width2.050 INCHES NOMINAL IN
materialUNABLE TO DECODE
special_featuresCAGE MATL STEEL;WASHER MATL STEEL
center_to_center_distance_between_mounting_holes_along_width1.497 INCHES MINIMUM AND 1.503 INCHES MAXIMUM IN
center_to_center_distance_between_mounting_holes_along_length1.528 INCHES MINIMUM AND 1.534 INCHES MAXIMUM IN
NSN5340-00-218-4695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 37L33-1-2AB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.497 INCHES MINIMUM AND 1.503 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.528 INCHES MINIMUM AND 1.534 INCHES MAXIMUM IN
•
WIDTH: 2.050 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.497 INCHES MINIMUM AND 1.503 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.528 INCHES MINIMUM AND 1.534 INCHES MAXIMUM IN
SPECIAL FEATURESCAGE MATL STEEL;WASHER MATL STEEL
WIDTH2.050 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 37L33-1-2AB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 37L33-1-2AB?
37L33-1-2AB is a CATCH,FLUSH.
What is the NSN for 37L33-1-2AB?
37L33-1-2AB is cataloged in the U.S. Government catalog under NSN 5340-00-218-4695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 37L33-1-2AB