PartsTable
Technical Data Sheet
Download PDF

37KT — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

37KT: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 7.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.3860 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-4069, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
37KT
NSN: 3110-00-156-4069
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter7.00 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.3860 INCHES NOMINAL IN
outer_ring_width0.4060 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter22.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data118 TYPE AND 1 CLASS
NSN3110-00-156-4069
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 37KT · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
OUTER RING WIDTH: 0.4060 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 22.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
NONDEFINITIVE SPEC/STD DATA: 118 TYPE AND 1 CLASS
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
OUTER RING WIDTH0.4060 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER22.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
NONDEFINITIVE SPEC/STD DATA118 TYPE AND 1 CLASS
LOAD DIRECTIONRADIAL
SEAL QUANTITY1
SUBSTITUTES & CROSS-REFERENCES 4
37TReference document
Same NSN cross-reference
Reference document — Secondary reference
CWC8037Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFB171Reference document
Same NSN cross-reference
Reference document — Identification reference
WC8037Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 37KT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 37KT?
37KT is a BEARING,BALL,ANNULAR.
What parts can replace 37KT?
There are 4 known substitutes for 37KT: 37T, CWC8037, FFB171 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 37KT?
37KT is cataloged in the U.S. Government catalog under NSN 3110-00-156-4069. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 37KT