PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 37C302103P104
37C302103P104 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.750 INCHES NOMINAL IN, overall_length: 1.750 INCHES NOMINAL IN, special_features: LOCATOR HOLE 0.124 IN. MIN,0.129 IN.

MAX DIA LOCATED 0.305 IN. LEFT OF CENTERLINE,0.130 IN. FROM OUTSIDE OF CASKET IN, style_designator: NON-CIRCULAR.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-417-5211, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
37C302103P104
NSN: 5330-00-417-5211
FSC: 5330
CAGE: 58779 — PARKER HANNIFIN CORP SEAL GROUP GASKET DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.750 INCHES NOMINAL IN
overall_length1.750 INCHES NOMINAL IN
special_featuresLOCATOR HOLE 0.124 IN. MIN,0.129 IN. MAX DIA LOCATED 0.305 IN. LEFT OF CENTERLINE,0.130 IN. FROM OUTSIDE OF CASKET IN
style_designatorNON-CIRCULAR
aperture_diameter1.090 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
bolt_hole_quantity4
outside_corner_radius0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
cross-sectional_thickness0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL WITH SOFT FILLER
outside_edge_to_bolt_hole_center_distance_along_width0.220 INCHES NOMINAL IN
NSN5330-00-417-5211
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 37C302103P104 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 1.090 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL: STEEL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: METAL WITH SOFT FILLER
•
OUTSIDE CORNER RADIUS: 0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.220 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.220 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER1.090 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
MATERIALSTEEL OVERALL
CROSS-SECTIONAL SHAPE STYLEMETAL WITH SOFT FILLER
OUTSIDE CORNER RADIUS0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.220 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.220 INCHES NOMINAL IN
SPECIAL FEATURESLOCATOR HOLE 0.124 IN. MIN,0.129 IN. MAX DIA LOCATED 0.305 IN. LEFT OF CENTERLINE,0.130 IN. FROM OUTSIDE OF CASKET IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.310 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
5006-1Interchangeable
interchangeable cross-reference
interchangeable
948276-1-1Interchangeable
interchangeable cross-reference
interchangeable
1941879Interchangeable
interchangeable cross-reference
interchangeable
5999006297250Interchangeable
interchangeable cross-reference
interchangeable
1001487Interchangeable
interchangeable cross-reference
interchangeable
1301300Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 37C302103P104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 37C302103P104?
37C302103P104 is a GASKET.
What parts can replace 37C302103P104?
There are 12 known substitutes for 37C302103P104: 5006-1, 948276-1-1, 1941879 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 37C302103P104?
37C302103P104 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-417-5211. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 37C302103P104

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026