PartsTable / O-RING / 379647
379647
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.689 INCHES MINIMUM AND 1.733 INCHES MAXIMUM IN, center_hole_diameter: 1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1977, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
379647
NSN: 5331-00-165-1977 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER FLUOROCARBON CLASS FPM temp_rating -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF hardness_rating 75.0 SHORE DUROMETER A NOMINAL outside_diameter 1.689 INCHES MINIMUM AND 1.733 INCHES MAXIMUM IN center_hole_diameter 1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN elongation_percentage 125 MAXIMUM cross-sectional_height 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN NSN 5331-00-165-1977
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 379647
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER HOLE DIAMETER: 1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 1.689 INCHES MINIMUM AND 1.733 INCHES MAXIMUM IN
• ELONGATION PERCENTAGE: 125 MAXIMUM
• MATERIAL: RUBBER FLUOROCARBON CLASS FPM
• HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
• TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
• CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER 1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN OUTSIDE DIAMETER 1.689 INCHES MINIMUM AND 1.733 INCHES MAXIMUM IN ELONGATION PERCENTAGE 125 MAXIMUM MATERIAL RUBBER FLUOROCARBON CLASS FPM HARDNESS RATING 75.0 SHORE DUROMETER A NOMINAL TEMP RATING -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF CROSS-SECTIONAL HEIGHT 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
878920 Interchangeable interchangeable cross-reference
interchangeable
HPT0151 Interchangeable interchangeable cross-reference
interchangeable
3-920 Interchangeable interchangeable cross-reference
interchangeable
568920-27 Interchangeable interchangeable cross-reference
interchangeable
7052637-06 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 379647?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 379647?
379647 is a O-RING.
What parts can replace 379647?
There are 21 known substitutes for 379647: 878920, HPT0151, 3-920 and 18 more. Substitute compatibility should be verified for your specific system.
Is 379647 still available?
379647 is currently cancelled.