PartsTable
Technical Data Sheet
Download PDF

379359 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

379359: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.9270 INCHES NOMINAL IN, overall_width: 0.6250 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, surface_finish: GROUND, style_designator: SEPARABLE ROLLERS, NO INNER RACE, HARDENED AND GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-085-0853, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
379359
NSN: 3110-00-085-0853
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 80256 — OUTBOARD MARINE CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.9270 INCHES NOMINAL IN
overall_width0.6250 INCHES NOMINAL IN
alignment_typeSELF-ALIGNING
surface_finishGROUND
style_designatorSEPARABLE ROLLERS, NO INNER RACE, HARDENED AND GROUND
lubrication_materialOIL LUBRICATING
self-alignment_locationINTERNAL
overall_outside_diameter1.0620 INCHES NOMINAL IN
NSN3110-00-085-0853
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 379359 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: OIL LUBRICATING
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SEPARABLE ROLLERS, NO INNER RACE, HARDENED AND GROUND
•
OVERALL OUTSIDE DIAMETER: 1.0620 INCHES NOMINAL IN
•
ALIGNMENT TYPE: SELF-ALIGNING
•
BORE DIAMETER: 0.9270 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALOIL LUBRICATING
SURFACE FINISHGROUND
STYLE DESIGNATORSEPARABLE ROLLERS, NO INNER RACE, HARDENED AND GROUND
OVERALL WIDTH0.6250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.0620 INCHES NOMINAL IN
ALIGNMENT TYPESELF-ALIGNING
BORE DIAMETER0.9270 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SELF-ALIGNMENT LOCATIONINTERNAL
SUBSTITUTES & CROSS-REFERENCES 3
391267Reference document
Same NSN cross-reference
Reference document — Secondary reference
309579AND382834Reference document
Same NSN cross-reference
Reference document — Secondary reference
382835Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 379359?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 379359?
379359 is a BEARING,ROLLER,NEEDLE.
What parts can replace 379359?
There are 3 known substitutes for 379359: 391267, 309579AND382834, 382835. Substitute compatibility should be verified for your specific system.
What is the NSN for 379359?
379359 is cataloged in the U.S. Government catalog under NSN 3110-00-085-0853. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 379359