PartsTable / COMPONENT / 37817
37817
✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
<b>Advanced, digital audio/video cable for the next generation of computer devices!</b><br><br>Lindy new Premium Gold DisplayPort cable features cutting edge design and construction to provide the highest quality, most reliable computer display connection available.<br><br>The triple shielded, low attenuation cable provides superb clarity, definition and detail, even over longer transmission distances, whilst the 24K gold plated connectors allow for an excellent, consistent signal transfer.<br><br>- DisplayPort 1.2 HD 2160p compatible<br>- Full support for high definition video, multi-channel digital audio, DPCP and HDCP<br>- 24K gold plated connector pins<br>- Supports resolutions up to 3840 x 2160<br>- Supports 8 channel, uncompressed 24bit audio<br>- Bandwidth: up to 4.32Gbps per lane (total 17.28Gbps)<br>- DisplayPort compliance certified This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-037-6880, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
37817
NSN: 5330-00-037-6880 FSC: 5330 CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
material GLASS PROTECTIVE CRYSTALGLASS PROTECTIVE CRYSTAL dial_size 2-3/4 IN. DIA2-3/4 IN. DIA IN bezel_type ANY ACCEPTABLEANY ACCEPTABLE body_width 3.230 INCHES MAXIMUM IN scale_name PRESSUREPRESSURE scale_type SINGLESINGLE body_height 4.230 INCHES MAXIMUM IN body_length 4.000 INCHES NOMINAL IN scale_range +10.0 TO 75.0 INCHES OF MERCURY+10.0 TO 75.0 INCHES OF MERCURY IN pointer_type INDICATINGINDICATING adjustability NONADJUSTABLENONADJUSTABLE hole_diameter 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN NSN 5330-00-037-6880
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 37817
MFR: Lindy
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.938 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• APERTURE DIAMETER: 2.078 INCHES NOMINAL IN
• HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH 2.812 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH 2.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 2.938 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN APERTURE DIAMETER 2.078 INCHES NOMINAL IN HOLE DIAMETER 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION MATERIAL ASBESTOS AND RUBBER SYNTHETIC OVERALL SPECIAL FEATURES APERTURE CENTER IS 1.406 IN. FROM EDGE OF LEFT W AND 2.282 IN. FROM EDGE OF RIGHT W IN OVERALL LENGTH 3.688 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.016 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
37817 Interchangeable interchangeable cross-reference
interchangeable
SP10370 Interchangeable interchangeable cross-reference
interchangeable
TP8 Interchangeable interchangeable cross-reference
interchangeable
AN5770-5 Interchangeable interchangeable cross-reference
interchangeable
6748-287 Interchangeable interchangeable cross-reference
interchangeable
A37817 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 37817?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 37817?
37817 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Lindy.
What parts can replace 37817?
There are 6 known substitutes for 37817: 37817, SP10370, TP8 and 3 more. Substitute compatibility should be verified for your specific system.
Is 37817 still available?
37817 is currently cancelled.