PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 37806

37806 — Technical Data Sheet

✓ Verified by PartsTable
Lindy · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Advanced, digital audio/video cable for the next generation of computer devices<br>- DisplayPort 1.2 HD 2160p compatible<br>- Full support for high definition video, multi-channel digital audio, DPCP and HDCP<br>- 24K gold plated connector pins<br>- Supports resolutions up to 3840 x 2160<br>- Supports 8 channel, uncompressed 24bit audio<br>- Bandwidth: up to 4.32Gbps per lane (total 17.28Gbps)<br>- DisplayPort compliance certified<br><br>Our new Gold DisplayPort cable features cutting edge design and construction to provide the highest quality, most reliable computer display connection available.<br><br>The triple shielded, low attenuation cable provides superb clarity, definition and detail, even over longer transmission distances, whilst the 24K gold plated connectors allow for an excellent, consistent signal transfer.<br><br><b>DisplayPort - The new standard for maximum display performance</b><br>DisplayPort is the next generation digital display interface standard designed to rep This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8439, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
37806
NSN: 3110-00-151-8439
FSC: 3110
CAGE: 73740 — TRW INC TRW COMMERCIAL STEERING DIV (USA)
SPECIFICATIONS
base_styleMOGUL SCREW
bulb_styleE (ELIPTICAL)
overall_length11.750 INCHES MAXIMUM IN
voltage_rating277.000 VOLTS NOMINAL
wattage_rating500.000 WATTS
bulb_designatorE-37
special_featuresENERGY EFFICIENT
rated_average_lifeHOURS
average_life_rating_in_hours16000.0
emitted_light_characteristicWHITE
bulb_light_transmission_characteristicTRANSLUCENT
NSN3110-00-151-8439
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 37806 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.7500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BACKFACE CORNER RADIUS: 0.1700 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.9200 INCHES NOMINAL IN
OUTSIDE DIAMETER2.7500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
SPECIAL FEATURESFRONT FACE CORNER RADIUS 0.110 IN BY 0.0800 IN.,ID OF LAND 1.9620 IN.,0.1700 IN. BY 30 DEG BACK-FACE CORNER RAD. IN
BACKFACE CORNER RADIUS0.1700 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
51265Interchangeable
interchangeable cross-reference
interchangeable
SA-3/DCInterchangeable
interchangeable cross-reference
interchangeable
32.554Interchangeable
interchangeable cross-reference
interchangeable
57J32G001Interchangeable
interchangeable cross-reference
interchangeable
57J32Interchangeable
interchangeable cross-reference
interchangeable
38AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 37806?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 37806?
37806 is a CUP,TAPERED ROLLER BEARING manufactured by Lindy.
What parts can replace 37806?
There are 18 known substitutes for 37806: 51265, SA-3/DC, 32.554 and 15 more. Substitute compatibility should be verified for your specific system.
Is 37806 still available?
37806 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 37806

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026