PartsTable
Technical Data Sheet
3764T79 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING BLADE, design_type: FIXED, end_position: CONNECTION END IN SAME PLANE AS HOOK END, overall_length: 4.625 INCHES NOMINAL IN, special_features: SNAP OPENING 13/16;EYE DIA 5/8;STOCK DIA 15/32, hook_style_designator: PIVOT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-502-1453, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3764T79
NSN: 5340-01-502-1453
FSC: 5340
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BLADE
design_typeFIXED
end_positionCONNECTION END IN SAME PLANE AS HOOK END
overall_length4.625 INCHES NOMINAL IN
special_featuresSNAP OPENING 13/16;EYE DIA 5/8;STOCK DIA 15/32
hook_style_designatorPIVOT
rubber_covered_featureNOT INCLUDED
NSN5340-01-502-1453
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3764T79 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL CORROSION RESISTING BLADE
HOOK STYLE DESIGNATOR: PIVOT
RUBBER COVERED FEATURE: NOT INCLUDED
END POSITION: CONNECTION END IN SAME PLANE AS HOOK END
DESIGN TYPE: FIXED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CORROSION RESISTING BLADE
HOOK STYLE DESIGNATORPIVOT
SPECIAL FEATURESSNAP OPENING 13/16;EYE DIA 5/8;STOCK DIA 15/32
RUBBER COVERED FEATURENOT INCLUDED
END POSITIONCONNECTION END IN SAME PLANE AS HOOK END
DESIGN TYPEFIXED
OVERALL LENGTH4.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
2337Interchangeable
interchangeable cross-reference
interchangeable
IPD4S8337Interchangeable
interchangeable cross-reference
interchangeable
ARM-8337Interchangeable
interchangeable cross-reference
interchangeable
AF0080100Interchangeable
interchangeable cross-reference
interchangeable
1200SPEC2337Interchangeable
interchangeable cross-reference
interchangeable
843MEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3764T79?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3764T79?
3764T79 is a SNAP HOOK.
What parts can replace 3764T79?
There are 9 known substitutes for 3764T79: 2337, IPD4S8337, ARM-8337 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3764T79?
3764T79 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-502-1453. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3764T79