PartsTable
Technical Data Sheet
Download PDF

3763-6 — REGULATOR,VOLTAGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3763-6: REGULATOR,VOLTAGE.

The REGULATOR,VOLTAGE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE, outside_diameter: 0.693 INCHES NOMINAL IN, center_hole_diameter: 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, end_item_identification: E/I CRANE,ELE/HY CAGE 60848. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-036-7699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3763-6
NSN: 5331-01-036-7699
NIINs: 010367699, 010967221, 014580226, 017197249
FSC: 5331 — O-ring
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE
outside_diameter0.693 INCHES NOMINAL IN
center_hole_diameter0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identificationE/I CRANE,ELE/HY CAGE 60848
NSN5331-01-036-7699
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3763-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.693 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.693 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE
SUBSTITUTES & CROSS-REFERENCES 5
AS568-112AMS3656ETYPE1GRADEAReference document
Same NSN cross-reference
Reference document — Design control — primary reference
3853PC18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS568-112MIL-P-24074TYPE1GRADEAReference document
Same NSN cross-reference
Reference document — Secondary reference
ARP568-112MILP2 4074Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4112-20Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3763-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3763-6?
3763-6 is a REGULATOR,VOLTAGE.
What parts can replace 3763-6?
There are 5 known substitutes for 3763-6: AS568-112AMS3656ETYPE1GRADEA, 3853PC18, AS568-112MIL-P-24074TYPE1GRADEA and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3763-6?
3763-6 is cataloged in the U.S. Government catalog under NSN 5331-01-036-7699. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3763-6