PartsTable
Technical Data Sheet
Download PDF

376143 — ELBOW,ANTIICING AIR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

376143: ELBOW,ANTIICING AIR.

The ELBOW,ANTIICING AIR is a the manufacturer industrial component. Key specifications include material: STEEL, hole_diameter: 0.203 INCHES NOMINAL IN, inside_height: 0.250 INCHES NOMINAL IN, inside_length: 1.625 INCHES NOMINAL IN, outside_width: 0.375 INCHES NOMINAL IN, painted_feature: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-032-2708, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
376143
NSN: 5340-00-032-2708
NIINs: 000322708, 007196613
FSC: 5340 — Hardware, Commercial
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
materialSTEEL
hole_diameter0.203 INCHES NOMINAL IN
inside_height0.250 INCHES NOMINAL IN
inside_length1.625 INCHES NOMINAL IN
outside_width0.375 INCHES NOMINAL IN
painted_featureNOT INCLUDED
style_designatorFOOTMANS LOOP
center_to_center_distance_between_holes3.125 INCHES NOMINAL IN
NSN5340-00-032-2708
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 376143 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE LENGTH: 1.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FOOTMANS LOOP
•
PAINTED FEATURE: NOT INCLUDED
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 3.125 INCHES NOMINAL IN
•
OUTSIDE WIDTH: 0.375 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
INSIDE HEIGHT: 0.250 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
INSIDE LENGTH1.625 INCHES NOMINAL IN
STYLE DESIGNATORFOOTMANS LOOP
PAINTED FEATURENOT INCLUDED
CENTER TO CENTER DISTANCE BETWEEN HOLES3.125 INCHES NOMINAL IN
OUTSIDE WIDTH0.375 INCHES NOMINAL IN
MATERIALSTEEL
INSIDE HEIGHT0.250 INCHES NOMINAL IN
HOLE DIAMETER0.203 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
32W225Reference document
Same NSN cross-reference
Reference document — Secondary reference
1165-1 1-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
500858Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
N1602Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 376143?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 376143?
376143 is a ELBOW,ANTIICING AIR.
What parts can replace 376143?
There are 4 known substitutes for 376143: 32W225, 1165-1 1-2, 500858 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 376143?
376143 is cataloged in the U.S. Government catalog under NSN 5340-00-032-2708. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 376143