PartsTable
Technical Data Sheet
Download PDF

376124 — STRAP,LEATHER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

376124: STRAP,LEATHER.

The STRAP,LEATHER is a the manufacturer industrial component. Key specifications include width: 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN, length: 12.000 INCHES NOMINAL IN, end_type: BOTH W/ATTACHMENTS, material: STEEL BUCKLE, buckle_location: ON END, surface_treatment: COPPER ALLOY BUCKLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-618-4495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
376124
NSN: 5340-00-618-4495
FSC: 5340 — Hardware, Commercial
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
width1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN
length12.000 INCHES NOMINAL IN
end_typeBOTH W/ATTACHMENTS
materialSTEEL BUCKLE
buckle_locationON END
keeper_quantity2
surface_treatmentCOPPER ALLOY BUCKLE
fsc_application_dataTOOL,HALF-TRACK CAR
buckle_fastening_methodSEWED
fastened_buckle_featureINCLUDED
fastened_keeper_featureINCLUDED
end_attachment/fastening_facilityBUCKLE AND BUCKLE TONGUE HOLE AND KEEPER
NSN5340-00-618-4495
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 376124 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: TOOL,HALF-TRACK CAR
•
LENGTH: 12.000 INCHES NOMINAL IN
•
DISTANCE FROM STRAP END TO FIRST HOLE: 2.500 INCHES NOMINAL IN
•
FASTENED BUCKLE FEATURE: INCLUDED
•
BUCKLE FASTENING METHOD: SEWED
•
MATERIAL DOCUMENT AND CLASSIFICATION: KK-L-271, TYPE 2 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
KEEPER QUANTITY: 2
•
FASTENED KEEPER FEATURE: INCLUDED
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATATOOL,HALF-TRACK CAR
LENGTH12.000 INCHES NOMINAL IN
DISTANCE FROM STRAP END TO FIRST HOLE2.500 INCHES NOMINAL IN
FASTENED BUCKLE FEATUREINCLUDED
BUCKLE FASTENING METHODSEWED
MATERIAL DOCUMENT AND CLASSIFICATIONKK-L-271, TYPE 2 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
KEEPER QUANTITY2
FASTENED KEEPER FEATUREINCLUDED
BUCKLE TONGUE HOLE LOCATION AND QUANTITY4 HOLES ON ONE END
CENTER TO CENTER DISTANCE BETWEEN HOLES0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
N3452Reference document
Same NSN cross-reference
Reference document — Secondary reference
32W3767Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 376124?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 376124?
376124 is a STRAP,LEATHER.
What parts can replace 376124?
There are 2 known substitutes for 376124: N3452, 32W3767. Substitute compatibility should be verified for your specific system.
What is the NSN for 376124?
376124 is cataloged in the U.S. Government catalog under NSN 5340-00-618-4495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 376124