PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 375604
375604 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: WOOL AND RUBBER OVERALL, outside_diameter: 1.888 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.850 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN, cross-sectional_thickness: 0.438 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-353-2769, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
375604
NSN: 5330-00-353-2769
FSC: 5330
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
materialWOOL AND RUBBER OVERALL
outside_diameter1.888 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.850 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
cross-sectional_thickness0.438 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-353-2769
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 375604 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.438 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.850 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: WOOL AND RUBBER OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 1.888 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.438 INCHES NOMINAL IN
APERTURE DIAMETER0.850 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
MATERIALWOOL AND RUBBER OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER1.888 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
667168Interchangeable
interchangeable cross-reference
interchangeable
48306Interchangeable
interchangeable cross-reference
interchangeable
480077Interchangeable
interchangeable cross-reference
interchangeable
AS4842Interchangeable
interchangeable cross-reference
interchangeable
AS4854AS01Interchangeable
interchangeable cross-reference
interchangeable
322125Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 375604?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 375604?
375604 is a GASKET.
What parts can replace 375604?
There are 19 known substitutes for 375604: 667168, 48306, 480077 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 375604?
375604 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-353-2769. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 375604

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026