PartsTable
Technical Data Sheet
375220 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BLOOD DILUTING SOLUTION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 AND STEEL COMP 321 OVERALL, overall_length: 0.6000 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN, body_inside_diameter: 0.1690 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM IN, body_outside_diameter: 0.2090 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
375220
NSN: 5330-00-291-1624
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL COMP 304 AND STEEL COMP 321 OVERALL
overall_length0.6000 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
body_inside_diameter0.1690 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM IN
body_outside_diameter0.2090 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM IN
NSN5330-00-291-1624
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 375220 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT DIAMETER: 2.625 INCHES NOMINAL IN
HOUSING BORE DIAMETER: 3.751 INCHES NOMINAL IN
CASE STYLE: SQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.625 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.751 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
375-220Interchangeable
interchangeable cross-reference
interchangeable
ISOTON IIInterchangeable
interchangeable cross-reference
interchangeable
8546720Interchangeable
interchangeable cross-reference
interchangeable
5220 52MInterchangeable
interchangeable cross-reference
interchangeable
L140Interchangeable
interchangeable cross-reference
interchangeable
5008911Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 375220?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 375220?
375220 is a BLOOD DILUTING SOLUTION.
What parts can replace 375220?
There are 14 known substitutes for 375220: 375-220, ISOTON II, 8546720 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 375220?
375220 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 375220