PartsTable / COMPONENT / 375139C
375139C
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include overall_width: 5.120 INCHES NOMINAL IN, overall_length: 14.180 INCHES NOMINAL IN, bolt_hole_quantity: 14, cross-sectional_thickness: 0.047 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-399-1923, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
375139C
NSN: 5330-01-399-1923 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
overall_width 5.120 INCHES NOMINAL IN overall_length 14.180 INCHES NOMINAL IN bolt_hole_quantity 14 cross-sectional_thickness 0.047 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION environmental_attribute_code ASBESTOS ALTERNATIVE PRODUCTS material_document_and_classification MIL-G-12803 TY 723200E43M MIL SPEC SINGLE MATERIAL RESPONSE OVERALL center_to_center_distance_between_bolt_holes_along_width 2.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN center_to_center_distance_between_bolt_holes_along_length 2.780 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN NSN 5330-01-399-1923
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 375139C
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.780 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
• CROSS-SECTIONAL THICKNESS: 0.047 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 TY 723200E43M MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 2.780 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN ENVIRONMENTAL ATTRIBUTE CODE ASBESTOS ALTERNATIVE PRODUCTS CROSS-SECTIONAL THICKNESS 0.047 INCHES NOMINAL IN OVERALL WIDTH 5.120 INCHES NOMINAL IN BOLT HOLE QUANTITY 14 CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION MATERIAL DOCUMENT AND CLASSIFICATION MIL-G-12803 TY 723200E43M MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OVERALL LENGTH 14.180 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH 2.180 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
02841 Interchangeable interchangeable cross-reference
interchangeable
5330013991923 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 375139C?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 375139C?
375139C is a GASKET.
What parts can replace 375139C?
There are 2 known substitutes for 375139C: 02841, 5330013991923. Substitute compatibility should be verified for your specific system.
Is 375139C still available?
375139C is currently cancelled.
Request a Quote — 375139C