PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3750112
3750112 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The DIVERTER HALF is a the manufacturer industrial component. Key specifications include end_item_identification: C130J HERCULES FIXED WING AIRCRAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-034-3590, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3750112
NSN: 5315-00-034-3590
FSC: 5315
CAGE: 13626 — ALCATEL NETWORK SYSTEMS INC (USA)
SPECIFICATIONS
end_item_identificationC130J HERCULES FIXED WING AIRCRAFT
NSN5315-00-034-3590
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3750112 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND SHANK LENGTH: 0.343 INCHES NOMINAL IN
•
THREAD LENGTH: 0.281 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
•
FIRST END LOCATION: OVAL END
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
STYLE DESIGNATOR: SHOULDER
TECHNICAL CHARACTERISTICS (FLIS)
SECOND SHANK LENGTH0.343 INCHES NOMINAL IN
THREAD LENGTH0.281 INCHES NOMINAL IN
SHOULDER DIAMETER0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
FIRST END LOCATIONOVAL END
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SPECIAL FEATURESWITH NUT AND LOCKWASHER
SURFACE TREATMENTPASSIVATE OVERALL
STYLE DESIGNATORSHOULDER
MATERIALSTEEL CORROSION RESISTING OVERALL
FIRST END STYLEOVAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
HT4025L3-10Interchangeable
interchangeable cross-reference
interchangeable
10125364Interchangeable
interchangeable cross-reference
interchangeable
CFR127Interchangeable
interchangeable cross-reference
interchangeable
507074Interchangeable
interchangeable cross-reference
interchangeable
STM 532-60Interchangeable
interchangeable cross-reference
interchangeable
5950PL0803119Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3750112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3750112?
3750112 is a DIVERTER HALF.
What parts can replace 3750112?
There are 12 known substitutes for 3750112: HT4025L3-10, 10125364, CFR127 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3750112?
3750112 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-034-3590. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3750112

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026