PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 37316-6
37316-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TERMINAL BOARD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, first_leg_length: 0.926 INCHES MINIMUM AND 0.977 INCHES MAXIMUM IN, second_leg_style: END RADIUS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-675-8364, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
37316-6
NSN: 5340-00-675-8364
FSC: 5340
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
first_leg_length0.926 INCHES MINIMUM AND 0.977 INCHES MAXIMUM IN
second_leg_styleEND RADIUS
second_leg_width0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
first_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_end_radius0.010 INCHES NOMINAL IN
second_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
NSN5340-00-675-8364
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 37316-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.676 INCHES MINIMUM AND 0.696 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
SECOND LEG HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 410
•
FIRST LEG WIDTH: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.025 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.676 INCHES MINIMUM AND 0.696 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
SECOND LEG WIDTH0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
SECOND LEG HOLE DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
MATERIALSTEEL COMP 410
FIRST LEG WIDTH0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.025 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
20116Interchangeable
interchangeable cross-reference
interchangeable
A-A-59125/4Interchangeable
interchangeable cross-reference
interchangeable
40TB16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 37316-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 37316-6?
37316-6 is a TERMINAL BOARD.
What parts can replace 37316-6?
There are 3 known substitutes for 37316-6: 20116, A-A-59125/4, 40TB16. Substitute compatibility should be verified for your specific system.
What is the NSN for 37316-6?
37316-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-675-8364. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 37316-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026