PartsTable
Technical Data Sheet
Download PDF

373.001 — IMPELLER,FAN,AXIAL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

373.001: IMPELLER,FAN,AXIAL.

The IMPELLER,FAN,AXIAL is a the manufacturer thermal management component critical for maintaining optimal operating temperatures in enterprise hardware. Key specifications include material: PLASTIC BLADE, hub_location: BACK AND FRONT, end_item_identification: 2320-01-353-9098. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-081-7036, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
373.001
NSN: 5315-00-081-7036
NIINs: 000817036, 013953438
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 94861 — MALABAR (USA)
SPECIFICATIONS
materialPLASTIC BLADE
hub_locationBACK AND FRONT
end_item_identification2320-01-353-9098
NSN5315-00-081-7036
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 373.001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.078 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.209 INCHES MINIMUM AND 1.229 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
TYPICAL APPLICATIONS
  • Server thermal management and cooling
  • Hot-swap fan replacement in production environments
  • Redundant cooling for high-availability systems
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.078 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.209 INCHES MINIMUM AND 1.229 INCHES MAXIMUM IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
HARDNESS RATING26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.562 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-8695 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
NASM5673Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS20392-6C33Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN397-33Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 373.001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 373.001?
373.001 is a IMPELLER,FAN,AXIAL.
What parts can replace 373.001?
There are 3 known substitutes for 373.001: NASM5673, MS20392-6C33, AN397-33. Substitute compatibility should be verified for your specific system.
What is the NSN for 373.001?
373.001 is cataloged in the U.S. Government catalog under NSN 5315-00-081-7036. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 373.001