PartsTable
Technical Data Sheet
Download PDF

37287-3 — PLATE,MENDING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

37287-3: PLATE,MENDING.

The PLATE,MENDING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052, overall_width: 0.400 INCHES NOMINAL IN, overall_length: 1.200 INCHES NOMINAL IN, special_features: ADHESIVE BACKED SILICONE RUBBER MOUNTED 1.120 IN. NOM FROM EDGE,CORNERS MITRED 45.0 DEGREES 0.100 IN.

NOM LG IN, style_designator: RECTANGULAR, surface_treatment: CHROMATE. This part is cataloged in the U.S. Government catalog under NSN 5310-00-576-5559, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
37287-3
NSN: 5310-00-576-5559
NIINs: 005765559, 011456992
FSC: 5310 — Nuts and Washers
CAGE: 019L2 — ESNA, LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5052
overall_width0.400 INCHES NOMINAL IN
overall_length1.200 INCHES NOMINAL IN
special_featuresADHESIVE BACKED SILICONE RUBBER MOUNTED 1.120 IN. NOM FROM EDGE,CORNERS MITRED 45.0 DEGREES 0.100 IN. NOM LG IN
style_designatorRECTANGULAR
surface_treatmentCHROMATE
material_thickness0.040 INCHES NOMINAL IN
mounting_hole_diameter0.124 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationMIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE A
NSN5310-00-576-5559
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 37287-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.443 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 550.0 FAHRENHEIT NOMINAL DEGF
•
WASHER THICKNESS: 0.070 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI1137 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5024 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.314 INCHES MINIMUM AND 0.329 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.443 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING550.0 FAHRENHEIT NOMINAL DEGF
WASHER THICKNESS0.070 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI1137 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5024 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 6
372872Reference document
Same NSN cross-reference
Reference document — Secondary reference
69415-428Reference document
Same NSN cross-reference
Reference document — Secondary reference
D52Z1835-048Reference document
Same NSN cross-reference
Reference document — Secondary reference
53546-428S9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
639299Reference document
Same NSN cross-reference
Reference document — Secondary reference
B00100-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 37287-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 37287-3?
37287-3 is a PLATE,MENDING.
What parts can replace 37287-3?
There are 6 known substitutes for 37287-3: 372872, 69415-428, D52Z1835-048 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 37287-3?
37287-3 is cataloged in the U.S. Government catalog under NSN 5310-00-576-5559. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 37287-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.