PartsTable
Technical Data Sheet

371160/373025 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

371160/373025: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 3.1 MILLIMETERS MINIMUM AND 4.6 MILLIMETERS MAXIMUM MM, hole_diameter: 18.0 MILLIMETERS MINIMUM AND 18.4 MILLIMETERS MAXIMUM MM, hardness_rating: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM, overall_diameter: 32.4 MILLIMETERS MINIMUM AND 34.0 MILLIMETERS MAXIMUM MM, special_features: M16 METRIC SIZE; Z/P CLEAR (TRIVALENT); 50 TO A BOX. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-611-9988, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
371160/373025
NSN: 5310-01-611-9988
NIINs: 016119988, 016513486
FSC: 5310 — Nuts and Washers
CAGE: 5YWZ2 — BRIGHTON-BEST INTERNATIONAL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness3.1 MILLIMETERS MINIMUM AND 4.6 MILLIMETERS MAXIMUM MM
hole_diameter18.0 MILLIMETERS MINIMUM AND 18.4 MILLIMETERS MAXIMUM MM
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
overall_diameter32.4 MILLIMETERS MINIMUM AND 34.0 MILLIMETERS MAXIMUM MM
special_featuresM16 METRIC SIZE; Z/P CLEAR (TRIVALENT); 50 TO A BOX
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-611-9988
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 371160/373025 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
SPECIAL FEATURESM16 METRIC SIZE; Z/P CLEAR (TRIVALENT); 50 TO A BOX
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
158HD88MY-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HSA005368Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
60451299Y16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 371160/373025?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 371160/373025?
371160/373025 is a WASHER,FLAT.
What parts can replace 371160/373025?
There are 3 known substitutes for 371160/373025: 158HD88MY-16, HSA005368, 60451299Y16. Substitute compatibility should be verified for your specific system.
What is the NSN for 371160/373025?
371160/373025 is cataloged in the U.S. Government catalog under NSN 5310-01-611-9988. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 371160/373025