The MICROCIRCUIT,DIGITAL-LINEAR is a the manufacturer industrial component. Key specifications include body_width: 0.265 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, body_height: 0.199 INCHES MAXIMUM IN, body_length: 0.755 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED AND W/ENABLE AND BIPOLAR AND MONOLITHIC, output_logic_form: P-TYPE METAL OXIDE-SEMICONDUCTOR LOGIC, inclosure_material: CERAMIC. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-00-659-6928, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| body_width | 0.265 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN |
| body_height | 0.199 INCHES MAXIMUM IN |
| body_length | 0.755 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN |
| features_provided | HERMETICALLY SEALED AND W/ENABLE AND BIPOLAR AND MONOLITHIC |
| output_logic_form | P-TYPE METAL OXIDE-SEMICONDUCTOR LOGIC |
| inclosure_material | CERAMIC |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| operating_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| input_circuit_pattern | 4 INPUT AND 8 CHANNEL |
| end_item_identification | 2M/MTR PIECE PARTS - SHORE IMA |
| inclosure_configuration | DUAL-IN-LINE |
| terminal_surface_treatment | SOLDER |
| NSN | 5962-00-659-6928 |
| TERMINAL SURFACE TREATMENT | SOLDER |
| END ITEM IDENTIFICATION | 2M/MTR PIECE PARTS - SHORE IMA |
| STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS DEGC |
| BODY WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN |
| TIME RATING PER CHACTERISTIC | 50.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT NS |
| INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -35.0 VOLTS MINIMUM POWER SOURCE AND 0.3 VOLTS MAXIMUM POWER SOURCE |
| TERMINAL TYPE AND QUANTITY | 16 PRINTED CIRCUIT |
| INCLOSURE MATERIAL | CERAMIC AND GLASS |
| TEST DATA DOCUMENT | 17773-11361953 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |