PartsTable
Technical Data Sheet
Download PDF

37078-01 — BRACKET,VEHICULAR COMPONENTS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

37078-01: BRACKET,VEHICULAR COMPONENTS.

The BRACKET,VEHICULAR COMPONENTS is a the manufacturer industrial component. Key specifications include end_item_identification: HERCULES C130J, FIXED WING AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-948-9856, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
37078-01
NSN: 5310-00-948-9856
NIINs: 009489856, 014777705, 015707465, 016713169
FSC: 5310 — Nuts and Washers
CAGE: 00752 — L3HARRIS TECHNOLOGIES, INC. DBA HARRIS CORP DIV ANTENNA PRODUCTS (USA)
SPECIFICATIONS
end_item_identificationHERCULES C130J, FIXED WING AIRCRAFT
NSN5310-00-948-9856
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 37078-01 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WIDTH ACROSS FLATS: 0.295 INCHES NOMINAL IN
•
THREAD SERIES: UNJC
•
TEMP RATING: 450.0 FAHRENHEIT MAXIMUM DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
PILOT DIAMETER: 0.213 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.058 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
WIDTH ACROSS FLATS0.295 INCHES NOMINAL IN
THREAD SERIESUNJC
TEMP RATING450.0 FAHRENHEIT MAXIMUM DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
PILOT DIAMETER0.213 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
PILOT LENGTH0.058 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.151 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
1830759-4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MK7201-08Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M45938/3-8CLReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
457-5605Reference document
Same NSN cross-reference
Reference document — Informative reference only
QB400497-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310009489856Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 37078-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 37078-01?
37078-01 is a BRACKET,VEHICULAR COMPONENTS.
What parts can replace 37078-01?
There are 8 known substitutes for 37078-01: 1830759-4, MK7201-08, M45938/3-8CL and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 37078-01?
37078-01 is cataloged in the U.S. Government catalog under NSN 5310-00-948-9856. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 37078-01