PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3705-3020-001
3705-3020-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.140 INCHES NOMINAL IN, material: PLASTIC OVERALL, overall_width: 0.250 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.040 INCHES NOMINAL IN, loop_inside_diameter: 0.187 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-005-4381, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3705-3020-001
NSN: 5340-00-005-4381
FSC: 5340
CAGE: K0656 — BAE SYSTEMS (OPERATIONS) LIMITED (GBR)
SPECIFICATIONS
diameter0.140 INCHES NOMINAL IN
materialPLASTIC OVERALL
overall_width0.250 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.187 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.780 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.280 INCHES NOMINAL IN
NSN5340-00-005-4381
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3705-3020-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC OVERALL
•
LOOP INSIDE DIAMETER: 0.187 INCHES NOMINAL IN
•
DIAMETER: 0.140 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.280 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.780 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC OVERALL
LOOP INSIDE DIAMETER0.187 INCHES NOMINAL IN
DIAMETER0.140 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.280 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.780 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
NX1Upgraded Successor
successor cross-reference
successor
A295-6Upgraded Successor
successor cross-reference
successor
22 025-002Upgraded Successor
successor cross-reference
successor
SSML7-4-2Upgraded Successor
successor cross-reference
successor
5340-99-932Upgraded Successor
successor cross-reference
successor
011152Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3705-3020-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3705-3020-001?
3705-3020-001 is a CLAMP,LOOP.
What parts can replace 3705-3020-001?
There are 8 known substitutes for 3705-3020-001: NX1, A295-6, 22 025-002 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3705-3020-001?
3705-3020-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-005-4381. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3705-3020-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026