PartsTable
Technical Data Sheet
370433-001 ✓ Verified by PartsTable
HPE · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

160GB Serial ATA/150 (SATA) hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high - With tray/carrier (Carbon). This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 7025-01-538-3068, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD 3.5_SATA_HDD 370433-001
NSN: 7025-01-538-3068
FSC: 7025
CAGE: 28480 — HEWLETT-PACKARD COMPANY DBA HP (USA)
SPECIFICATIONS
Part Number370433-001
ManufacturerHPE
Capacity160GB
NSN7025-01-538-3068
COMPONENT DIAGRAM
RELEASE LATCH 160GB NL-SAS 7.2K 370433-001 HPE NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | 160GB | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 370433-001 MFR HPE
KEY FEATURES
160GB Capacity
FEATURES PROVIDED: ELECTROMAGNETIC INTERFERENCE SHIELDING AND ELECTROSTATIC SENSITIVE
DATA STORAGE CAPACITY: 160.00 GIGABYTES
DESIGN TYPE: PERSONAL COMPUTER MEMORY CARD
DRIVE HEIGHT: HALF
OPERATING TEMP RANGE: +41.0 TO 131.0 FAHRENHEIT DEGF
TYPICAL APPLICATIONS
  • Enterprise storage arrays and SANs
  • Direct-attached storage (DAS) expansion
  • Database tier storage (OLTP, OLAP)
  • Virtual machine datastore expansion
  • Backup-to-disk and disaster recovery targets
  • Content delivery and media streaming storage
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDELECTROMAGNETIC INTERFERENCE SHIELDING AND ELECTROSTATIC SENSITIVE
OVERALL WIDTH4.000 INCHES NOMINAL IN
OVERALL LENGTH6.000 INCHES NOMINAL IN
DATA STORAGE CAPACITY160.00 GIGABYTES
DESIGN TYPEPERSONAL COMPUTER MEMORY CARD
END ITEM IDENTIFICATIONAN/FPS-123 V1 & V7
DRIVE HEIGHTHALF
OPERATING TEMP RANGE+41.0 TO 131.0 FAHRENHEIT DEGF
UNIT DESIGNINTERNAL
SPECIAL FEATURESESD AND EMI; 7200 RPM; CONNECTOR-40 PIN IDC; 3.5 IN. X 1/3 H FORM FACTOR; T.O. 31P6-2FPS123-171/8-2/4; 9MS-17.8MS SEEK TIME; 0.9 MS TRACK-TO-TRACK SEEK TIME; LINE VOLTAGE-90-132 VAC/180-265 VAC; LINE FREQUENCY-50/60 HZ; INPUT CURRENT-2.4 A(100VAC), 1.3 A(200 VAC); DATA TRANSFER RATE-100 MBPS VAC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
05-10277-01Interchangeable
Same NIIN cross-reference
interchangeable
397552-001Compatible
HP 160GB SATA 1.5g 7.2k LFF St HDD
compatible
334278-001Compatible
HP 160Gb SATA 1.5G 7.2K LFF HDD - Bare Drive
compatible
353043-001Compatible
HP 160GB SATA 1.5g 7.2k LFF St HDD
compatible
397377-003Compatible
HP 160Gb SATA 1.5G 7.2K LFF HDD - Bare Drive
compatible
397377-019Compatible
HP 160Gb SATA 1.5G 7.2K LFF HDD - Bare Drive
compatible
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
THIS PART SUBSTITUTES FOR 20
FB160C4081SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
GB0160CAABVSUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
VB0160CBCDESUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
334278-001SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
349238-B21SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
353043-001SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
372895-B21SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
373312-001SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
373312-005SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
390617-001SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
397377-003SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
397377-019SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
397552-001SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
399164-B21SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
399467-001SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
399968-001SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
407525-002SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
411275-B21SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
431688-002SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
440300-002SUBSTITUTE
HP 160Gb SATA 1.5G 7.2K LFF HDD for DL100 G1 Storage Server
HPE
Ready to buy 370433-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 370433-001?
370433-001 is a 160GB Serial ATA/150 (SATA) hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high - With tray/carrier (Carbon) manufactured by HPE. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 370433-001?
There are 13 known substitutes for 370433-001: 05-10277-01, 397552-001, 334278-001 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 370433-001?
370433-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 7025-01-538-3068. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 370433-001