PartsTable
Technical Data Sheet
Download PDF

37038-5 — GUIDE,CHASSIS,SIDE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

37038-5: GUIDE,CHASSIS,SIDE.

The GUIDE,CHASSIS,SIDE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, end_radius: 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, fork_depth: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, shank_length: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, hole_diameter: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN, thread_length: 0.298 INCHES MINIMUM AND 0.338 INCHES MAXIMUM ROD CONNECTION IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-774-6763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 37038-5
NSN: 5340-00-774-6763
NIINs: 007746763, 011618423
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
end_radius0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
fork_depth0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
shank_length0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
hole_diameter0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
thread_length0.298 INCHES MINIMUM AND 0.338 INCHES MAXIMUM ROD CONNECTION IN
overall_height0.400 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
shank_diameter0.190 INCHES NOMINAL IN
fork_span_width0.092 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionLEFT-HAND ROD CONNECTION
fork_arm_thickness0.045 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
NSN5340-00-774-6763
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 37038-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.190 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.092 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.045 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
END RADIUS: 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.298 INCHES MINIMUM AND 0.338 INCHES MAXIMUM ROD CONNECTION IN
•
SHANK LENGTH: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.190 INCHES NOMINAL IN
OVERALL HEIGHT0.400 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
FORK SPAN WIDTH0.092 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
FORK ARM THICKNESS0.045 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
END RADIUS0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
THREAD LENGTH0.298 INCHES MINIMUM AND 0.338 INCHES MAXIMUM ROD CONNECTION IN
SHANK LENGTH0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONLEFT-HAND ROD CONNECTION
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 37038-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 37038-5?
37038-5 is a GUIDE,CHASSIS,SIDE. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 37038-5?
37038-5 is cataloged in the U.S. Government catalog under NSN 5340-00-774-6763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 37038-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.