PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3702-12
3702-12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STATIC LINE SNAP is a the manufacturer industrial component. Key specifications include supplementary_features: PCCN B01602 PLISN A005, PCC FRC; USED WITH PERSONNEL PARACHUTE, end_item_identification: AIRDROP ITEMS SPECIAL PROJECT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-136-5088, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3702-12
NSN: 5330-00-136-5088
FSC: 5330
CAGE: 07443 — LANDOLL CORPORATION DBA LANDOLL CORPORATION DREXEL DIVISION DIV DREXEL (USA)
SPECIFICATIONS
supplementary_featuresPCCN B01602 PLISN A005, PCC FRC; USED WITH PERSONNEL PARACHUTE
end_item_identificationAIRDROP ITEMS SPECIAL PROJECT
NSN5330-00-136-5088
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3702-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER: 3.500 INCHES NOMINAL IN
•
MATERIAL: PLASTIC BOTTOM RING
•
INTERMEDIATE RING QUANTITY: 5
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE BOTTOM RING
•
HEIGHT: 1.419 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.960 INCHES MINIMUM AND 4.020 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER3.500 INCHES NOMINAL IN
MATERIALPLASTIC BOTTOM RING
MATERIALPLASTIC TOP RING
INTERMEDIATE RING QUANTITY5
MATERIALRUBBER SYNTHETIC INTERMEDIATE RING
CROSS-SECTIONAL SHAPE STYLEANGLE BOTTOM RING
HEIGHT1.419 INCHES NOMINAL IN
OUTSIDE DIAMETER3.960 INCHES MINIMUM AND 4.020 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
217098-0Interchangeable
interchangeable cross-reference
interchangeable
370212Interchangeable
interchangeable cross-reference
interchangeable
11-1-6991-1Interchangeable
interchangeable cross-reference
interchangeable
1A0125Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3702-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3702-12?
3702-12 is a STATIC LINE SNAP.
What parts can replace 3702-12?
There are 4 known substitutes for 3702-12: 217098-0, 370212, 11-1-6991-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3702-12?
3702-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-136-5088. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3702-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026