PartsTable
Technical Data Sheet
Download PDF

37-01640-002 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

37-01640-002: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_length: 1.750 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-948-8581, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
37-01640-002
NSN: 5340-00-948-8581
FSC: 5340 — Hardware, Commercial
CAGE: K0268 — RAYTHEON SYSTEMS LTD (GBR)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_length1.750 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length0.750 INCHES NOMINAL IN
first_leg_thickness0.048 INCHES NOMINAL IN
second_leg_thickness0.048 INCHES NOMINAL IN
first_leg_hole_diameter0.205 INCHES NOMINAL IN
second_leg_hole_diameter0.438 INCHES NOMINAL IN
first_leg_hole_arrangement_styleONE HOLE
second_leg_relationship_to_first_legIDENTICAL
NSN5340-00-948-8581
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 37-01640-002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE DIAMETER: 0.205 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.438 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.750 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: END RADIUS
TECHNICAL CHARACTERISTICS
FIRST LEG HOLE DIAMETER0.205 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SECOND LEG HOLE DIAMETER0.438 INCHES NOMINAL IN
SECOND LEG LENGTH0.750 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
STYLE DESIGNATORANGLE
FIRST LEG STYLEEND RADIUS
SECOND LEG THICKNESS0.048 INCHES NOMINAL IN
FIRST LEG THICKNESS0.048 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
MS75009-8Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
70-268927-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS75009Reference document
Same NSN cross-reference
Reference document — Identification reference
L02023Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 37-01640-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 37-01640-002?
37-01640-002 is a BRACKET,ANGLE.
What parts can replace 37-01640-002?
There are 4 known substitutes for 37-01640-002: MS75009-8, 70-268927-8, MS75009 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 37-01640-002?
37-01640-002 is cataloged in the U.S. Government catalog under NSN 5340-00-948-8581. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 37-01640-002