PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 36HCALIBRATED
36HCALIBRATED ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 6.00 MILLIMETERS NOMINAL MM, overall_width: 6.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1056, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
36HCALIBRATED
NSN: 3110-00-198-1056
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter6.00 MILLIMETERS NOMINAL MM
overall_width6.00 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
special_featuresINSTRUMENT TESTED
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
internal_clearance0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
calibration_designatorC
overall_outside_diameter19.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
NSN3110-00-198-1056
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 36HCALIBRATED · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
MATERIAL: STEEL INNER RING
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
BORE DIAMETER: 6.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONRADIAL
MATERIALSTEEL INNER RING
MATERIALPLASTIC PHENOLIC RETAINER
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
SPECIAL FEATURESINSTRUMENT TESTED
BORE DIAMETER6.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
INTERNAL CLEARANCE0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
5564Interchangeable
interchangeable cross-reference
interchangeable
140BH01Interchangeable
interchangeable cross-reference
interchangeable
70934Interchangeable
interchangeable cross-reference
interchangeable
Q36HS5064Interchangeable
Same NIIN cross-reference
interchangeable
Q36HS5064UInterchangeable
Same NIIN cross-reference
interchangeable
244007Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36HCALIBRATED?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36HCALIBRATED?
36HCALIBRATED is a BEARING,BALL,ANNULAR.
What parts can replace 36HCALIBRATED?
There are 10 known substitutes for 36HCALIBRATED: 5564, 140BH01, 70934 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 36HCALIBRATED?
36HCALIBRATED is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1056. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36HCALIBRATED

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026