369N2684 — BELL CRANK

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

369N2684: BELL CRANK.

The BELL CRANK is a the manufacturer industrial component. Key specifications include material: MAGNESIUM, bore_length: 0.900 INCHES NOMINAL IN, bore_diameter: 0.7488 INCHES MINIMUM AND 0.7495 INCHES MAXIMUM IN, style_designator: RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS, surface_treatment: DICHROMATE, end_hole/ball_diameter: 0.1895 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM SECOND END IN. This part is cataloged in the U.S.

Government catalog under NSN 1680-00-922-9373, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

369N2684

NSN: 1680-00-922-9373
FSC: 1680 — Miscellaneous Aircraft Accessories and Components
CAGE: 8V613 — THE BOEING COMPANY (USA)

SPECIFICATIONS

material	MAGNESIUM
bore_length	0.900 INCHES NOMINAL IN
bore_diameter	0.7488 INCHES MINIMUM AND 0.7495 INCHES MAXIMUM IN
special_features	AA ARM END HOLE LEFT SIDE REAMED TO 0.3750 IN. DIA,BB ARM END HOLE RIGHT SIDE REAMED TO 0.3125 IN. DIA,USED ON TAIL ROTOR CONTROL IN
style_designator	RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS
surface_treatment	DICHROMATE
end_hole/ball_diameter	0.1895 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM SECOND END IN
center_to_center_distance_between_fulcrum_and_arm_end_hole/slot/ball	5.270 INCHES NOMINAL SECOND END IN
NSN	1680-00-922-9373

COMPONENT DIAGRAM

KEY FEATURES

•

CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL: 2.990 INCHES NOMINAL FIRST END IN

•

END HOLE/BALL DIAMETER: 0.1895 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM SECOND END IN

•

BORE LENGTH: 0.900 INCHES NOMINAL IN

•

STYLE DESIGNATOR: RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS

•

SURFACE TREATMENT: DICHROMATE

TECHNICAL CHARACTERISTICS

CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	2.990 INCHES NOMINAL FIRST END IN
CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL	5.270 INCHES NOMINAL SECOND END IN
END HOLE/BALL DIAMETER	0.1895 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM SECOND END IN
END HOLE/BALL DIAMETER	0.2495 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM FIRST END IN
BORE LENGTH	0.900 INCHES NOMINAL IN
STYLE DESIGNATOR	RAISED FACE PIVOT HOLE, CLEVIS BOTH ENDS
SPECIAL FEATURES	AA ARM END HOLE LEFT SIDE REAMED TO 0.3750 IN. DIA,BB ARM END HOLE RIGHT SIDE REAMED TO 0.3125 IN. DIA,USED ON TAIL ROTOR CONTROL IN
SURFACE TREATMENT	DICHROMATE
BORE DIAMETER	0.7488 INCHES MINIMUM AND 0.7495 INCHES MAXIMUM IN
MATERIAL	MAGNESIUM

OTHER ITEMS IN FSC 1680 — Miscellaneous Aircraft Accessories and Components

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

1680-00-000-0144 1680-00-001-1401 1680-00-001-1402 1680-00-001-1403 1680-00-001-1404 1680-00-001-1730 1680-00-001-1731 1680-00-001-1736

SUBSTITUTES & CROSS-REFERENCES 2

369A7527Reference document

Same NSN cross-reference

Reference document — Secondary reference

10363508Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)

Ready to buy 369N2684?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 369N2684?

369N2684 is a BELL CRANK.

What parts can replace 369N2684?

There are 2 known substitutes for 369N2684: 369A7527, 10363508. Substitute compatibility should be verified for your specific system.

What is the NSN for 369N2684?

369N2684 is cataloged in the U.S. Government catalog under NSN 1680-00-922-9373. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

369N2684 — BELL CRANK

Request a Quote — 369N2684