PartsTable
Technical Data Sheet
Download PDF

369A7510 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

369A7510: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, shank_length: 0.984 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.469 INCHES NOMINAL IN, overall_length: 1.677 INCHES MINIMUM AND 1.697 INCHES MAXIMUM IN, shank_diameter: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-949-8032, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
369A7510
NSN: 5315-00-949-8032
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 02731 — MCDONNELL DOUGLAS HELICOPTER CO INC (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
shank_length0.984 INCHES NOMINAL IN
thread_class3A A
thread_length0.469 INCHES NOMINAL IN
overall_length1.677 INCHES MINIMUM AND 1.697 INCHES MAXIMUM IN
shank_diameter0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
first_end_styleCHAMFERED
style_designatorSHOULDER
thread_directionRIGHT-HAND
first_end_locationBOTH ENDS
first_hole_diameter0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
nominal_thread_size0.312 INCHES IN
NSN5315-00-949-8032
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 369A7510 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 0.4360 INCHES MINIMUM AND 0.4365 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.030 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
THREAD LENGTH: 0.469 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
SECOND SHANK DIAMETER0.4360 INCHES MINIMUM AND 0.4365 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.030 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
HOLE ARRANGEMENT STYLEONE END DRILLED
THREAD LENGTH0.469 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
SHANK LENGTH0.984 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
10390134Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 369A7510?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 369A7510?
369A7510 is a PIN,SHOULDER,HEADLESS.
What parts can replace 369A7510?
There is 1 known substitute for 369A7510: 10390134. Substitute compatibility should be verified for your specific system.
What is the NSN for 369A7510?
369A7510 is cataloged in the U.S. Government catalog under NSN 5315-00-949-8032. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 369A7510

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.