PartsTable
Technical Data Sheet
PartsTable / O-RING / 36978-8
36978-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.803 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN, center_hole_diameter: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN, cross-sectional_height: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-808-0794, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
36978-8
NSN: 5331-00-808-0794
FSC: 5331 — O-RING
CAGE: 64829 — ARVINMERITOR INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter0.803 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
center_hole_diameter0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
cross-sectional_height0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
NSN5331-00-808-0794
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 36978-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 0.803 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER0.803 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
END ITEM IDENTIFICATION3990-01-444-5196 CEMENT MIXER; RG-31 MRAP; MEDIUM MINE PROTECTED VEHICLE - AMPV; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
908-7507Interchangeable
interchangeable cross-reference
interchangeable
M15-16700PIECE2Interchangeable
interchangeable cross-reference
interchangeable
5331PL0784464Interchangeable
interchangeable cross-reference
interchangeable
MS28778-8Interchangeable
interchangeable cross-reference
interchangeable
9469127107Interchangeable
interchangeable cross-reference
interchangeable
456239Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36978-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36978-8?
36978-8 is a O-RING.
What parts can replace 36978-8?
There are 31 known substitutes for 36978-8: 908-7507, M15-16700PIECE2, 5331PL0784464 and 28 more. Substitute compatibility should be verified for your specific system.
Is 36978-8 still available?
36978-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36978-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026