PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 369750PC3
369750PC3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.750 INCHES NOMINAL IN, overall_length: 17.562 INCHES NOMINAL IN, aperture_length: 15.562 INCHES NOMINAL IN, inside_corner_radius: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-260-0218, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
369750PC3
NSN: 5330-00-260-0218
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.750 INCHES NOMINAL IN
overall_length17.562 INCHES NOMINAL IN
aperture_length15.562 INCHES NOMINAL IN
inside_corner_radius0.500 INCHES NOMINAL IN
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
center_to_center_distance_between_bolt_holes_along_width2.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-260-0218
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 369750PC3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE LENGTH: 15.562 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH6.750 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH17.562 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE LENGTH15.562 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
AF-800Interchangeable
interchangeable cross-reference
interchangeable
3S4745Interchangeable
interchangeable cross-reference
interchangeable
ARM-916Interchangeable
interchangeable cross-reference
interchangeable
42745Interchangeable
interchangeable cross-reference
interchangeable
42745-1Interchangeable
interchangeable cross-reference
interchangeable
40478Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 369750PC3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 369750PC3?
369750PC3 is a GASKET.
What parts can replace 369750PC3?
There are 10 known substitutes for 369750PC3: AF-800, 3S4745, ARM-916 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 369750PC3?
369750PC3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-260-0218. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 369750PC3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026