PartsTable
Technical Data Sheet
PartsTable / O-RING / 36974-16 ITEM 15CP
36974-16 ITEM 15CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 1.974 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, criticality_code_justification: ZZZY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-096-8817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
36974-16 ITEM 15CP
NSN: 5331-01-096-8817
FSC: 5331 — O-RING
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter1.974 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
criticality_code_justificationZZZY
material_document_and_classificationMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5331-01-096-8817
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 36974-16 ITEM 15CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CENTER HOLE DIAMETER: 1.974 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM
CRITICALITY CODE JUSTIFICATIONZZZY
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER1.974 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
03226Interchangeable
interchangeable cross-reference
interchangeable
3226Interchangeable
interchangeable cross-reference
interchangeable
003226Interchangeable
interchangeable cross-reference
interchangeable
137618239Interchangeable
interchangeable cross-reference
interchangeable
2615-226Interchangeable
interchangeable cross-reference
interchangeable
SR226SR832-75AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36974-16 ITEM 15CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36974-16 ITEM 15CP?
36974-16 ITEM 15CP is a O-RING.
What parts can replace 36974-16 ITEM 15CP?
There are 16 known substitutes for 36974-16 ITEM 15CP: 03226, 3226, 003226 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 36974-16 ITEM 15CP?
36974-16 ITEM 15CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-096-8817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36974-16 ITEM 15CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026