PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 368L
368L ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM METER CASE, scale_type: ETCHED TUBEETCHED TUBE, design_type: FLUCTUATINGFLUCTUATING, stem_length: 3.500 INCHES NOMINAL3.500 INCHES NOMINAL IN, scale_length: 9.000 INCHES NOMINAL9.000 INCHES NOMINAL IN, overall_width: 2.406 INCHES NOMINAL2.406 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
368L
NSN: 3110-00-120-4369
FSC: 3110
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
materialALUMINUM METER CASE
scale_typeETCHED TUBEETCHED TUBE
design_typeFLUCTUATINGFLUCTUATING
stem_length3.500 INCHES NOMINAL3.500 INCHES NOMINAL IN
scale_length9.000 INCHES NOMINAL9.000 INCHES NOMINAL IN
overall_width2.406 INCHES NOMINAL2.406 INCHES NOMINAL IN
overall_length16.719 INCHES NOMINAL16.719 INCHES NOMINAL IN
actuating_mediumLIQUIDLIQUID
style_designatorADJUSTABLE ANGLE
securing_device_typeCLIPCLIP
scale_measurement_range+50.000 TO 400.000 DEG FAHRENHEIT+50.000 TO 400.000 DEG FAHRENHEIT
scale_smallest_increment5.0 DEG FAHRENHEIT5.0 DEG FAHRENHEIT
NSN3110-00-120-4369
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 368L · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 2.0625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
OVERALL WIDTH1.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL OUTSIDE DIAMETER2.0625 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
BORE DIAMETER1.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
187-85Interchangeable
interchangeable cross-reference
interchangeable
60-23-9652Interchangeable
interchangeable cross-reference
interchangeable
245205Interchangeable
interchangeable cross-reference
interchangeable
787-24-02-004Interchangeable
interchangeable cross-reference
interchangeable
215-36320-1Interchangeable
interchangeable cross-reference
interchangeable
8264-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 368L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 368L?
368L is a BEARING,ROLLER,NEEDLE.
What parts can replace 368L?
There are 20 known substitutes for 368L: 187-85, 60-23-9652, 245205 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 368L?
368L is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 368L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026