PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 36853514
36853514 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.875 INCHES NOMINAL IN, overall_length: 8.500 INCHES NOMINAL IN, aperture_length: 7.750 INCHES NOMINAL IN, special_features: THREE BOLT HOLES 0.344 IN. DIA IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-208-5303, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
36853514
NSN: 5330-01-208-5303
FSC: 5330
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.875 INCHES NOMINAL IN
overall_length8.500 INCHES NOMINAL IN
aperture_length7.750 INCHES NOMINAL IN
special_featuresTHREE BOLT HOLES 0.344 IN. DIA IN
bolt_hole_quantity4
NSN5330-01-208-5303
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 36853514 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE LENGTH: 7.750 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH3.875 INCHES NOMINAL IN
APERTURE LENGTH7.750 INCHES NOMINAL IN
SPECIAL FEATURESTHREE BOLT HOLES 0.344 IN. DIA IN
OVERALL LENGTH8.500 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
39805Interchangeable
interchangeable cross-reference
interchangeable
4280002-8Interchangeable
interchangeable cross-reference
interchangeable
1345798Interchangeable
interchangeable cross-reference
interchangeable
3685F005Interchangeable
interchangeable cross-reference
interchangeable
9075-39795 ITEM 11Interchangeable
interchangeable cross-reference
interchangeable
42597Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36853514?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36853514?
36853514 is a GASKET.
What parts can replace 36853514?
There are 7 known substitutes for 36853514: 39805, 4280002-8, 1345798 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 36853514?
36853514 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-208-5303. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36853514

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026