367035-1 — BEARING,WASHER,THRUST

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

367035-1: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include corner_shape: SQUARE INSIDE LEFT CORNER, flange_width: 0.1100 INCHES MINIMUM AND 0.1610 INCHES MAXIMUM IN, hole_diameter: 0.0610 INCHES MINIMUM AND 0.0710 INCHES MAXIMUM FIRST IN, overall_length: 0.7800 INCHES MINIMUM AND 0.8100 INCHES MAXIMUM IN, surface_finish: 250.0 MICROINCHES INTERMEDIATE LAYER, special_features: OD OPPOSITE FLANGE END GROUND TO 0.8320 IN. MIN,0.8350 IN.

MAX DIA BY 0.2200 IN. MIN,0.2400 IN. MAX LG IN.

This part is cataloged in the U.S. Government catalog under NSN 3120-01-003-6653, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

367035-1

NSN: 3120-01-003-6653
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 81833 — AEROCONTROLEX GROUP, INC. (USA)

SPECIFICATIONS

corner_shape	SQUARE INSIDE LEFT CORNER
flange_width	0.1100 INCHES MINIMUM AND 0.1610 INCHES MAXIMUM IN
hole_diameter	0.0610 INCHES MINIMUM AND 0.0710 INCHES MAXIMUM FIRST IN
overall_length	0.7800 INCHES MINIMUM AND 0.8100 INCHES MAXIMUM IN
surface_finish	250.0 MICROINCHES INTERMEDIATE LAYER
special_features	OD OPPOSITE FLANGE END GROUND TO 0.8320 IN. MIN,0.8350 IN. MAX DIA BY 0.2200 IN. MIN,0.2400 IN. MAX LG IN
style_designator	SOLID, EXTERNAL FLANGE ONE END, INTERNAL FLANGE ONE END
body_inside_diameter	0.8093 INCHES MINIMUM AND 0.8100 INCHES MAXIMUM IN
body_outside_diameter	0.8400 INCHES MINIMUM AND 0.8500 INCHES MAXIMUM IN
flange_outside_diameter	0.9450 INCHES MINIMUM AND 0.9550 INCHES MAXIMUM IN
right_internal_flange_hole_diameter	0.6700 INCHES MINIMUM AND 0.6900 INCHES MAXIMUM IN
antirotation/lubrication_type_and_quantity	2 HOLE
NSN	3120-01-003-6653

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 250.0 MICROINCHES INTERMEDIATE LAYER

•

CORNER SHAPE: SQUARE INSIDE RIGHT CORNER

•

FLANGE OUTSIDE DIAMETER: 0.9450 INCHES MINIMUM AND 0.9550 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SURFACE FINISH	250.0 MICROINCHES INTERMEDIATE LAYER
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER	0.9450 INCHES MINIMUM AND 0.9550 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER	0.8400 INCHES MINIMUM AND 0.8500 INCHES MAXIMUM IN
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END, INTERNAL FLANGE ONE END

SUBSTITUTES & CROSS-REFERENCES 1

365312-4Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 367035-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 367035-1?

367035-1 is a BEARING,WASHER,THRUST.

What parts can replace 367035-1?

There is 1 known substitute for 367035-1: 365312-4. Substitute compatibility should be verified for your specific system.

What is the NSN for 367035-1?

367035-1 is cataloged in the U.S. Government catalog under NSN 3120-01-003-6653. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

367035-1 — BEARING,WASHER,THRUST

Request a Quote — 367035-1