PartsTable
Technical Data Sheet
Download PDF

366Y076 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

366Y076: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 10.500 INCHES NOMINAL IN, center_hole_diameter: 9.045 INCHES MINIMUM AND 10.005 INCHES MAXIMUM IN, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN, cross-sectional_shape_style: SPECIAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-906-1493, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
366Y076
NSN: 5330-00-906-1493
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER OVERALL
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter10.500 INCHES NOMINAL IN
center_hole_diameter9.045 INCHES MINIMUM AND 10.005 INCHES MAXIMUM IN
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
cross-sectional_shape_styleSPECIAL
material_document_and_classification3664 FSCM 07322 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-906-1493
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 366Y076 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 3664 FSCM 07322 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 10.500 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 9.045 INCHES MINIMUM AND 10.005 INCHES MAXIMUM IN
•
MATERIAL: RUBBER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION3664 FSCM 07322 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER10.500 INCHES NOMINAL IN
CENTER HOLE DIAMETER9.045 INCHES MINIMUM AND 10.005 INCHES MAXIMUM IN
MATERIALRUBBER OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
366YQ76Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AN6227-76Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
77621-01X2PC9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 366Y076?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 366Y076?
366Y076 is a PACKING,PREFORMED.
What parts can replace 366Y076?
There are 3 known substitutes for 366Y076: 366YQ76, AN6227-76, 77621-01X2PC9. Substitute compatibility should be verified for your specific system.
What is the NSN for 366Y076?
366Y076 is cataloged in the U.S. Government catalog under NSN 5330-00-906-1493. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 366Y076

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.