PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 366096
366096 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include end_item_identification: 3930-01-223-8437. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-551-2236, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
366096
NSN: 5330-00-551-2236
FSC: 5330
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
end_item_identification3930-01-223-8437
NSN5330-00-551-2236
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 366096 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 1.151 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.803 INCHES MINIMUM AND 0.807 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1010 OVERALL
•
ANGLE: 20.0 DEGREES NOMINAL
•
CROSS-SECTIONAL THICKNESS: 0.0239 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: U
•
CROSS-SECTIONAL HEIGHT: 0.201 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER1.151 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.803 INCHES MINIMUM AND 0.807 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1010 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1010 OVERALL
ANGLE20.0 DEGREES NOMINAL
CROSS-SECTIONAL THICKNESS0.0239 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEU
CROSS-SECTIONAL HEIGHT0.201 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
F10J200Interchangeable
interchangeable cross-reference
interchangeable
3-4TA51FS200Interchangeable
interchangeable cross-reference
interchangeable
23475Interchangeable
interchangeable cross-reference
interchangeable
LL313-24Interchangeable
interchangeable cross-reference
interchangeable
2808A339Interchangeable
interchangeable cross-reference
interchangeable
37637Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 366096?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 366096?
366096 is a RETAINER,PACKING.
What parts can replace 366096?
There are 23 known substitutes for 366096: F10J200, 3-4TA51FS200, 23475 and 20 more. Substitute compatibility should be verified for your specific system.
Is 366096 still available?
366096 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 366096

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026