366-200-2896 — PAWL,AMMUNITION FEED

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

366-200-2896: PAWL,AMMUNITION FEED.

The PAWL,AMMUNITION FEED is a the manufacturer industrial component. Key specifications include material: STEEL, overall_length: 2.366 INCHES NOMINAL IN, end_item_identification: MACHINE GUN,CAL. .50 (M2); NSN 1005-00-322-9715.

This part is cataloged in the U.S. Government catalog under NSN 1005-00-600-8914, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

366-200-2896

NSN: 1005-00-600-8914
FSC: 1005 — Guns, Through 30mm
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES

SPECIFICATIONS

material	STEEL
overall_length	2.366 INCHES NOMINAL IN
special_features	HEAT AT 1540 TO 1580 DEGREES F;OIL QUENCH;TEMPER 1 HOUR;CONTAINS 2 HOLES 0.1285 IN.DIA;0.076 IN DIA;SURFACE FINISH:PHOSPHATE COATED IN
end_item_identification	MACHINE GUN,CAL. .50 (M2); NSN 1005-00-322-9715
general_characteristics_item_description	MATERIAL THICKNESS 0.120 IN.; PIVOT PIN HOLE IDA 0.326 IN.; LENGTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT 0.791 IN. IN
NSN	1005-00-600-8914

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: MATERIAL THICKNESS 0.120 IN.; PIVOT PIN HOLE IDA 0.326 IN.; LENGTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT 0.791 IN. IN

•

MATERIAL: STEEL

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION	MATERIAL THICKNESS 0.120 IN.; PIVOT PIN HOLE IDA 0.326 IN.; LENGTH FROM PIVOT PINHOLE CENTERLINE TO POINT OF ENGAGEMENT 0.791 IN. IN
OVERALL LENGTH	2.366 INCHES NOMINAL IN
SPECIAL FEATURES	HEAT AT 1540 TO 1580 DEGREES F;OIL QUENCH;TEMPER 1 HOUR;CONTAINS 2 HOLES 0.1285 IN.DIA;0.076 IN DIA;SURFACE FINISH:PHOSPHATE COATED IN
END ITEM IDENTIFICATION	MACHINE GUN,CAL. .50 (M2); NSN 1005-00-322-9715
MATERIAL	STEEL

SUBSTITUTES & CROSS-REFERENCES 8

05415230000792Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10074228Reference document

Same NSN cross-reference

Reference document — Informative reference only

711662807208Reference document

Same NSN cross-reference

Reference document — Informative reference only

1005PL1648653Reference document

Same NSN cross-reference

Reference document — Informative reference only

201030202Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

3040PL0911489Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Demilitarization required — mutilation + specific procedure

Ready to buy 366-200-2896?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 366-200-2896?

366-200-2896 is a PAWL,AMMUNITION FEED.

What parts can replace 366-200-2896?

There are 8 known substitutes for 366-200-2896: 05415230000792, 10074228, 711662807208 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 366-200-2896?

366-200-2896 is cataloged in the U.S. Government catalog under NSN 1005-00-600-8914. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

366-200-2896 — PAWL,AMMUNITION FEED

Request a Quote — 366-200-2896