PartsTable
Technical Data Sheet
Download PDF

3657043 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3657043: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.344 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.750 INCHES NOMINAL IN, tongue_hole_type: ROUND, UNTHREADED, loop_inside_diameter: 1.969 INCHES NOMINAL IN, center_to_center_distance_between_loop_and_mounting_hole: 1.422 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-737-7274, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3657043
NSN: 5340-00-737-7274
FSC: 5340 — Hardware, Commercial
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
diameter0.344 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.750 INCHES NOMINAL IN
tongue_hole_typeROUND, UNTHREADED
loop_inside_diameter1.969 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.422 INCHES NOMINAL IN
NSN5340-00-737-7274
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3657043 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.344 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.422 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 1.969 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DIAMETER0.344 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.422 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER1.969 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
7377274Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 3657043?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3657043?
3657043 is a CLAMP,LOOP.
What parts can replace 3657043?
There is 1 known substitute for 3657043: 7377274. Substitute compatibility should be verified for your specific system.
What is the NSN for 3657043?
3657043 is cataloged in the U.S. Government catalog under NSN 5340-00-737-7274. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3657043