PartsTable
Technical Data Sheet
Download PDF

3655-042 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3655-042: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include shank_length: 1.250 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A, overall_width: 0.293 INCHES NOMINAL IN, thread_length: 0.465 INCHES NOMINAL ROD CONNECTION IN, overall_height: 0.250 INCHES NOMINAL IN, shank_diameter: 0.186 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-187-5531, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3655-042
NSN: 5340-01-187-5531
FSC: 5340 — Hardware, Commercial
CAGE: 66503 — WOODWARD, INC. DIV FUEL SYSTEMS AND CONTROLS (USA)
SPECIFICATIONS
shank_length1.250 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
overall_width0.293 INCHES NOMINAL IN
thread_length0.465 INCHES NOMINAL ROD CONNECTION IN
overall_height0.250 INCHES NOMINAL IN
shank_diameter0.186 INCHES NOMINAL IN
fork_span_width0.192 INCHES NOMINAL IN
fork_arm_thickness0.048 INCHES NOMINAL IN
nominal_thread_size0.164 INCHES ROD CONNECTION IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) ROD CONNECTION
securing_pin_hole_diameter0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
distance_from_pivot_pinhole_center_to_rod_connection_end1.500 INCHES NOMINAL IN
NSN5340-01-187-5531
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3655-042 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.186 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.192 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.048 INCHES NOMINAL IN
•
THREAD LENGTH: 0.465 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.186 INCHES NOMINAL IN
OVERALL HEIGHT0.250 INCHES NOMINAL IN
FORK SPAN WIDTH0.192 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
FORK ARM THICKNESS0.048 INCHES NOMINAL IN
THREAD LENGTH0.465 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH1.250 INCHES NOMINAL IN
OVERALL WIDTH0.293 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.164 INCHES ROD CONNECTION IN
THREAD CLASS3A ROD CONNECTION A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3655-042?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3655-042?
3655-042 is a CLEVIS,ROD END.
What is the NSN for 3655-042?
3655-042 is cataloged in the U.S. Government catalog under NSN 5340-01-187-5531. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3655-042

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.