PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 365209
365209 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

COUPLING ASSEMBLY,QUICK DISCONNE. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.139 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN, fastener_length: 1.500 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL, width_between_flats: 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-285-7003, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
365209
NSN: 5305-00-285-7003
FSC: 5305
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.139 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
fastener_length1.500 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
width_between_flats0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
internal_drive_styleW/O INTERNAL DRIVE
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.216 INCHES IN
NSN5305-00-285-7003
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 365209 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 32
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2A A
•
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7228 ASSN STD SINGLE MATERIAL RESPONSE
•
SCREW SURFACE TREATMENT: PASSIVATE
•
HEAD DIAMETER: 0.255 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH32
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
FASTENER LENGTH0.375 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS 7228 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENTPASSIVATE
HEAD DIAMETER0.255 INCHES NOMINAL IN
SCREW MATERIALSTEEL COMP 430
HEAD STYLEFLAT COUNTERSUNK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
SM-250Interchangeable
interchangeable cross-reference
interchangeable
365209Interchangeable
interchangeable cross-reference
interchangeable
365208Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 365209?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 365209?
365209 is a COUPLING ASSEMBLY,QUICK DISCONNE.
What parts can replace 365209?
There are 3 known substitutes for 365209: SM-250, 365209, 365208. Substitute compatibility should be verified for your specific system.
What is the NSN for 365209?
365209 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-285-7003. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 365209

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026