PartsTable
Technical Data Sheet
Download PDF

365169 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

365169: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_diameter: 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN, load_direction: RADIAL, inner_ring_width: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, outer_ring_width: 0.4325 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN, special_features: LOADING GROOVE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-997-1813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
365169
NSN: 3110-00-997-1813
NIINs: 009971813, 011979461
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_diameter1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
inner_ring_width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
outer_ring_width0.4325 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
special_featuresLOADING GROOVE
style_designatorSINGLE ROW INNER RING EXTENDED BOTH SIDES
bearing_seal_typeCONTACT
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter2.2495 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
NSN3110-00-997-1813
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 365169 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.4325 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SINGLE ROW INNER RING EXTENDED BOTH SIDES
•
OVERALL OUTSIDE DIAMETER: 2.2495 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
•
LOAD DIRECTION: RADIAL
•
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.4325 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
OVERALL OUTSIDE DIAMETER2.2495 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
SPECIAL FEATURESLOADING GROOVE
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
SEAL QUANTITY2
BORE DIAMETER1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
365157Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 365169?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 365169?
365169 is a BEARING,BALL,AIRFRAME.
What parts can replace 365169?
There is 1 known substitute for 365169: 365157. Substitute compatibility should be verified for your specific system.
What is the NSN for 365169?
365169 is cataloged in the U.S. Government catalog under NSN 3110-00-997-1813. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 365169

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.